Home / Products / Dense Busbar Trunking System 100–800A AC/DC with Plug-in Tap-off Units
Dense Busbar Trunking System 100–800A AC/DC with Plug-in Tap-off Units
Busway

Dense Busbar Trunking System 100–800A AC/DC with Plug-in Tap-off Units

Quick AnswerDense Busbar Trunking System ⁦100–800⁩A AC/DC with Plug-in Tap-off Units — an IDCPDU Busway for data-centre backbone power distribution.
  1. Tap-off boxes on a live busway — Add, move or remove a plug-in box while the duct is energised — a new row goes in without a shutdown window.
  2. One busbar for AC and DC — The same run carries AC or DC tap-offs, so a lab bench and an AI hall share one product family — no second design, no second spare-parts list.
  3. Standard 1 / 2 / 3 m sections — Runs follow column grids, corridors and building curves with stock lengths — no bespoke duct, no waiting on a special extrusion.
  4. Tap-off units across current classes — One duct serves an instrument circuit and a heavy rack row on the same plug-in interface, so the spare-parts stock stays small.

Tel: +86-574-63783045 · ricky@idcpdu.com

Contact Us
SHARE:

Product Description

  • ⁦100–800⁩ A AC / ⁦400–800⁩ A DC overhead busbar for rack rows.
  • Three parts: incoming box, busbar trunk, plug-in tap-off units.
  • Tap-off units stay pluggable while the trunk is energised.
  • Row power in most halls still means a distribution cabinet at the head of each row and cable trays under the floor. Every new row brings another cable run, another set of breakers and a shutdown window — while the floor plan keeps changing. A dense busbar run replaces that whole chain with one line above the racks.
  • The system has four elements: an incoming box with main MCCB, surge protection and metering; a dense busbar trunk with T2 copper conductors in a compact profile; plug-in tap-off boxes; and standard trunk sections of 1 m, 2 m and 2.4 m, plus custom lengths and elbows that follow columns, aisles and building curves. Tap-off box and trunk form one unit, so the assembly sits close to the rack and takes far less space than row-end cabinet feeding.
  • Conductors are T2 copper bars in a distributed heat-dissipation structure: heat leaves through the housing by air conduction instead of building up at the joints. Temperature rise stays low under continuous full load, which keeps the run stable over years of operation.
  • One family covers ⁦100–800⁩ A AC and ⁦400–800⁩ A DC. Tap-off boxes come in 16 A, 32 A and 63 A, single or three phase, with one to three outlets, in angled plug-in, straight plug-in or bottom cable exit versions — standard, metered, or with phase selection. Typical use: data centres, telecom rooms, hospitals, laboratories and production lines where the layout changes but the power cannot be switched off.
  • Every project is built to your single-line diagram: drawings in 30 minutes, a quotation within the hour, from a 12,000 m² plant running ISO 9001 with CE and EMC certified components.

Frequently Asked Questions

What is the incoming box current of Dense Busbar Trunking System ⁦100–800⁩A AC/DC with Plug-in Tap-off Units?

⁦⁦100–630⁩⁩ A (AC) / ⁦⁦400–800⁩⁩ A (DC)

What is the incoming box size of Dense Busbar Trunking System ⁦100–800⁩A AC/DC with Plug-in Tap-off Units?

850×430×223 / 1050×450×300 / 1100×450×300 mm

What is the trunk current (AC) of Dense Busbar Trunking System ⁦100–800⁩A AC/DC with Plug-in Tap-off Units?

⁦⁦100–400⁩⁩ A at 180×156 mm / ⁦⁦630–800⁩⁩ A at 196×162 mm

What is the trunk current (DC) of Dense Busbar Trunking System ⁦100–800⁩A AC/DC with Plug-in Tap-off Units?

⁦⁦400–800⁩⁩ A at 180×156 mm

What is the tap-off current of Dense Busbar Trunking System ⁦100–800⁩A AC/DC with Plug-in Tap-off Units?

16 A / 32 A / 63 A

What is the tap-off size of Dense Busbar Trunking System ⁦100–800⁩A AC/DC with Plug-in Tap-off Units?

230×260×150 to 400×260×150 mm

Related Products

← Back to Products